Dynacord L1300FD DSP Power Amplifier 2 x 650w

Live performance DSP amplifier
Fully integrated professional speaker processing with FIR Drive technology
Market leading acoustic performance and rock solid reliability
True 2 ohm stability
Intuitive system control software, makes setup and control easy

Specs

Load Impedance 2? 2.6? 4? 8?
Maximum Output Power, Single Channel 2?=1100W; 2.6? =950W; 4?=660W; 8?=350W
Maximum Output Power, Dual Channel 2?=1000W; 2.6? =850W; 4?=600W; 8?=320W

Maximum Output Power, Bridged 4?=2000W; 8?=1200W
Maximum RMS Voltage Swing, THD = 1%, 1kHz 55.3 V
Voltage Gain ref.1kHz 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
DIM 30 < 0.05% (3.15 kHz, 15 kHz)
Maximum Input Level +21 dBu
Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 ?)
Frequency Response 10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced 20k?
Signal-to-Noise Ratio (A-weighted) >104dB
Output Noise , A-weighted < -68 dBu
Output Stage Topology Class AB
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 550 W (? Maximum Output Power @4?)
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Safety Class I
Available Color Black
Height 88mm (3.46″)
Width 483mm (19.02″)
Depth 462.4mm (18.2″)
Weight Net 12.9kg (28.44 lbs)
Signal Processing FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH
Operating Temperature Range +5°C to +40°C (40°F to +105°F)
Total Harmonic Distortion < 0.05% (at 450 W/4 ? MBW = 80 kHz, 1 kHz)